[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Fiberglass Resin and Secondary



Original poster: "Dwight Harm" <dwighth-at-traxsoft-dot-com> 

Tyler,
Note that current recommendations for NST TCs is to use 1400-1600 turns on
the secondary.
Dwight.

 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Tuesday, September 30, 2003 5:34 AM

 > Original poster: Tyler <blimpie120-at-yahoo-dot-com>
...
 > I have now redesigned my plans tho. 3" diameter 17" tall secondary with 24
 > ga wire, 850 turns. The res frequency will be around 372 kHz, with a
 > .0053uF tank cap. 6" inner diameter primary, .025" pipe, spaced about .57"
 > apart, bout 10 winds. A 13" x 3" or smaller torrid for the top.
 > And a 15kv 30ma NST for power, Still have to figure out the filtering
protection for
 > it though.
...