Re: VERY HIGH BPS at 6kw!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "colin.heath4 by way of Terry Fritz <teslalist-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>

hi,
     id have to challenge this claim of spark length with a cap that small at
7200v
as the tank cap at low voltages tends to be big to make use of the large
current.
do you have any pics of this?
i dont usually question anyone on there output but this seems houge for the
size of tank cap
id love it if it were true then we could all learn something from you!
cheers
colin

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, May 13, 2003 12:41 AM
Subject: Re: VERY HIGH BPS at 6kw!


 > Original poster: "Gregory Hunter by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <ghunter31014-at-yahoo-dot-com>
 >
 >  > I'd just like to report that I have gotten 10' with
 >  > my 0.041 uF Geek MMC, 3
 >  > strings of 11. I used an ARSG and a 7200 volt pole
 >  > transformer. I think if
 >  > I add a series spark gap to help with quenching, it
 >  > will go even farther.
 >  > Power arcing happens so easily when the high end
 >  > current goes near 1 amp.
 >  >
 >  > Regards,
 >  > Gregory
 >
 > 10' on 7200vac? That's very interesting. Can I trouble
 > you to describe your coil system--primary/secondary
 > dimensions & so forth, or else provide a link to a
 > description? I have a special interest in low-voltage,
 > high-current systems.
 >
 > Thanks,
 >
 >
 >
 > =====
 > Gregory R. Hunter
 >
 > http://hot-streamer-dot-com/greg
 >
 >