[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Toroid question



Original poster: "robert & june heidlebaugh by way of Terry Fritz <teslalist-at-qwest-dot-net>" <rheidlebaugh-at-desertgate-dot-com>

Robert: I simply use two pie pans held together with a hollow lamp bolt and
two 1/8 NPT nuts. That way it slides over a 1/4 brass toilet bolt to mount
at whatever hight I choose.
       Robert   H
-- 


 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > Date: Sat, 10 May 2003 11:15:09 -0600
 > To: tesla-at-pupman-dot-com
 > Subject: Toroid question
 > Resent-From: tesla-at-pupman-dot-com
 > Resent-Date: Sat, 10 May 2003 11:38:27 -0600
 >
 > Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>"
 > <Pomnept-at-aol-dot-com>
 >
 > Thanks to you helpful people, I have tuned my Tesla coil and it works!  Can
 > anybody recommend a good method of attaching the toroid to the top of the
 > secondary so that I can move it up and down and change toroids without too
 > much trouble?  Thanks in advance.
 >
 > Robert Hanford
 >
 >