[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Marx Generator Success!



Original poster: "Mike Harrison by way of Terry Fritz <teslalist-at-qwest-dot-net>" <mike-at-whitewing.co.uk>

For comparison, my new Marx produces 25" sparks from 25KV input, 20 stages 
(2.2nf/stage)

On Sat, 10 May 2003 15:25:32 -0600, you wrote:

 >Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" 
<dhmccauley-at-spacecatlighting-dot-com>
 >
 >Finally got my marx generator running and producing 15" arcs.  However, I'm
 >currently only charging the caps to about 20kV and will need to increase the
 >gap spacing for all
 >my gaps (easily done) and hopefully I'll be able to get 2 foot arcs!  I'm
 >keeping my fingers crossed.
 >Thing is really loud too!
 >
 >Dan
 >
 >
 >
 >----- Original Message -----
 >From: "Tesla list" <tesla-at-pupman-dot-com>
 >To: <tesla-at-pupman-dot-com>
 >Sent: Saturday, May 10, 2003 1:15 PM
 >Subject: Toroid question
 >
 >
 > > Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>"
 ><Pomnept-at-aol-dot-com>
 > >
 > > Thanks to you helpful people, I have tuned my Tesla coil and it works!
 >Can
 > > anybody recommend a good method of attaching the toroid to the top of the
 > > secondary so that I can move it up and down and change toroids without too
 > > much trouble?  Thanks in advance.
 > >
 > > Robert Hanford
 > >
 > >
 > >
 > >
 > >
 >