[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Water Pig
Original poster: "Jeremy Scott by way of Terry Fritz <teslalist-at-qwest-dot-net>" <supertux1-at-yahoo-dot-com>
What about tungsten electrodes, sealed in with pure
distilled water via plastic tubing?
Say all this in a plasic t joint with water
being pumped one way, and electrodes facing
the other way.
--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "robert & june heidlebaugh by way
> of Terry Fritz <teslalist-at-qwest-dot-net>"
> <rheidlebaugh-at-desertgate-dot-com>
>
> Ken, The problem is not " can water be used as a
> dielectric' The problem
> is water is a universal solvent that will collect
> ions from almost
> everything and will then not be pure.Pure nickel and
> titanium are among the
> few electrodes that can be used. Stainless steel
> will disolve quickley and
> make THE WATER CONDUCTIVE. Pt and Pd have there own
> problems.
> Robert H
> --
>
>
> > From: "Tesla list" <tesla-at-pupman-dot-com>
> > Date: Thu, 01 May 2003 22:51:02 -0600
> > To: tesla-at-pupman-dot-com
> > Subject: Re: Water Pig
> > Resent-From: tesla-at-pupman-dot-com
> > Resent-Date: Thu, 1 May 2003 22:53:05 -0600
> >
> > Original poster: "Jeremy Scott by way of Terry
> Fritz <teslalist-at-qwest-dot-net>"
> > <supertux1-at-yahoo-dot-com>
> >
> > Hey now,
> >
> > Water can be a good dielectric :) 1MV/cm
> >
> >
> >
>
http://www.eece.unm.edu/cp3/Publications/Shu_Xiao-Repetition_Rate.pdf
> >
> >
> >> If I'm not mistaken, the T&R Electric water
> cooled
> >> transformer somebody got
> >> was "recondtioned and certified" too. I've got a
> >> printer, I'll certify
> >> whatever you want.
> >>
> >> KEN
> >>
> >>
>