Re: Formless secondaries

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Yurtle Turtle by way of Terry Fritz <teslalist-at-qwest-dot-net>" <yurtle_t-at-yahoo-dot-com>

You appear to have a form. My question was regarding a
formless coil.

Adam

--- Tesla list <tesla-at-pupman-dot-com> wrote:
 > Original poster: "by way of Terry Fritz
 > <teslalist-at-qwest-dot-net>"
 > <dhmccauley-at-spacecatlighting-dot-com>
 >
 > See the pictures on the bottom of the following
 > page.  They show how i
 > finished the top of my 10" secondary coil.
 >
 > The Captain
 >
 > http://www.spacecatlighting-dot-com/teslacoil7.htm
 >
 >
 >
 >  > OK.
 >  >
 >  > Assuming I were to make an 8" to 10" formless
 >  > secondary, how would I support a rather large
 > spun
 >  > aluminum topload?
 >  >
 >  > thanks
 >  > Adam
 >
 >