RE: WANTED: 1 Foot piece of 6" PVC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" <jim-at-jlproduction-dot-com>

I got a section you can have. I will make sure it's a whole foot
tomorrow (it's at work).

I will say this however; if it's for a TCBOR/Richard Quick type gap then
don't bother. You can make an air blast gap quicker, cheaper and easier.
Not to mention the fact it will work a WHOLE bunch better.

Just my opinion,
Jim Layton
jim-at-jlproduction-dot-com




-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Tuesday, March 11, 2003 7:21 PM
To: tesla-at-pupman-dot-com
Subject: Re: WANTED: 1 Foot piece of 6" PVC

Original poster: "Yurtle Turtle by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <yurtle_t-at-yahoo-dot-com>

I don't know where you live, but both Home Depot and
Lowes sell 6" x 10' PVC for around $13 here in
Georgia. It's the thicker walled type, but it's pretty
cheap.

Adam

--- Tesla list <tesla-at-pupman-dot-com> wrote:
  > Original poster: "Mccauley, Daniel H by way of Terry
  > Fritz <teslalist-at-qwest-dot-net>"
  > <daniel.h.mccauley-at-lmco-dot-com>
  >
  > Anyone have a 1 Foot of 6" PVC they would want to
  > sell me???
  >
  > All my sources, both online, and locally have 20
  > foot minimum order and its
  > priced quite high.  So if you have any
  > extra pieces. . .
  >
  > Thanks
  >
  > Dan
  >
  >