Re: electrical properties of acrylic

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ed Phillips by way of Terry Fritz <teslalist-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
 >
 > Original poster: "Resonance Research Corp. by way of Terry Fritz 
<teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>
 >
 > We just brush the AC-43 on.  We prefer using this as the finishing coats on
 > magnet wire type coils.
 >
 > Even with the PVC tubes we always brush on 3 coats of Glyptal inside and out
 > before winding.  Just use a piece of rag dipped into the Glyptal and the rag
 > is affixed to a piece of stiff wood like closet pole material or big dowel.
 >
 > Then, after the magnet wire is wound the AC-43 makes a nice 3-4 finishing
 > coats.  With PVC insulated wire on our larger coils we use a single coat of
 > the clear Gyptal.  Multiple coats produce a yellowish discoloration.  A coat
 > is always required to seal the PVC and prevent tracking.
 >
 > Dr. Resonance

	Where do you get clear Glyptal (or red Glyptal, for that matter) these
days?

Ed