[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Is this MMC layout ok?

To: tesla-at-pupman-dot-com
Subject: Is this MMC layout ok?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 17 Jun 2003 19:57:01 -0600
Resent-Date: Tue, 17 Jun 2003 19:57:37 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <1dbSV.A.13F.Pc87--at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Christopher \"CajunCoiler\" Mayeux by way of Terry Fritz <teslalist-at-qwest-dot-net>" <cajuncoiler-at-cox-dot-net>


I have worked out when seems to be a decent
layout for my MMC board, using Excel... if
y'all could take a peek, and let me know if
there's any numbers out of place in the
measurements, I'd appreciate it.

http://members.cox-dot-net/cajuncoiler/Docs/mmc.xls

If it asks for verification, just click [OK].
Thanx in advance,
---
Christopher 'CajunCoiler' Mayeux
http://www.cajuncoiler.tk

Prev by Date: Tek P6015 thoughts - Re: Very nice High Bandwidth 75MHz HV Probe on EBAY ! ! !
Next by Date: Re: Finally a Field Mill!
Prev by thread: Re: Luxtrol D2500 and D6000 Dimmers (Correction)
Next by thread: Re: Is this MMC layout ok?
Index(es):
- Date
- Thread