Re: Why i want a pt Re: 5KVA or bigger PT for sale?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "June Heidlebaugh by way of Terry Fritz <teslalist-at-qwest-dot-net>" <rheidlebaugh-at-desertgate-dot-com>

Scott A majority of mobile home installations require 250 amp service
connections and electric stove require 80 amp service connections, My shop
welder requires 100 amp service. that is 100 amps on each leg of the 117
volt service. If you use electric heat in your house you should have 400 amp
service.
-    Robert  H             ---- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, June 15, 2003 6:10 PM
Subject: Re: Why i want a pt Re: 5KVA or bigger PT for sale?


 > Original poster: "Bunnykiller by way of Terry Fritz <teslalist-at-qwest-dot-net>"
<bunikllr-at-bellsouth-dot-net>
 >
 > Tesla list wrote:
 >
 > >Original poster: "Adam Britt by way of Terry Fritz <teslalist-at-qwest-dot-net>"
 > ><beans45601-at-sbcglobal-dot-net>
 > >
 > >The main reason i want a pt is because i do shows a lot and in most
 > >places, a 240 volt line in not w.
 > >
 > >Thanks
 > >adam
 > >
 > not too sure what w means at the end of the sentence...  but...   5+KVA on
 > 120 volt line will be 42 amps   and if you go + on the 5KVA you will go
 > higher on the 120 line amps also...   not too many places offer a 120 line
 > system rated for 50 amps, as far as setting up for shows...    NEC
probably
 > limits the amperage on 120 any way    so it wont be code correct if it was
 > hobbled together with some #6 wire and a 50 amp breaker  ( ive never seen
a
 > 50A 120V breaker   but then again I never looked for one) .
 >
 > Scot D
 >
 >
 >
 >
 >
 >