[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: differential probes

To: tesla-at-pupman-dot-com
Subject: Re: differential probes
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 09 Jul 2003 23:00:21 -0600
In-Reply-To: <20030709212113.50587.qmail-at-web12501.mail.yahoo-dot-com>
Resent-Date: Wed, 9 Jul 2003 23:00:55 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <5PTqGD.A._XD.EMPD_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <teslalist-at-qwest-dot-net>

Hi Jimmy,

I still have not had time to finalize my design and try a prototype but I 
will.  Is surface mount a problem for you to layout?  I could probably just 
send you the prototype too so you can see how it would go together.

Cheers,

         Terry

At 02:21 PM 7/9/2003 -0700, you wrote:
>If you guys will finish a differential probe prototype design or two, I'll 
>lay it out for you to check. I'll also buy the parts and get them 
>assembled for you.
>
>
>Jimmy

Prev by Date: Re: Sparks from an IGBT brick!
Next by Date: OLTC - Re: Primary resonators with very low L/C ratio
Prev by thread: differential probes
Next by thread: Re: differential probes
Index(es):
- Date
- Thread