[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: how do you mount a variac?



Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>


Most variacs have mounting holes on the front plate where the dial is.  Use
four bolts and attach to the panel.

Dan




 > I am in the process of building my control box for my coil and I can't
 > figure out how to mount the coil on to my box. I have seen people's
variacs
 > that are just hanging there, but their are no bolts on the other side...
 > Also, on a slightly random note, when you turn off the power to your caps,
 > how much heat do the bleeder resistors give off?
 > Thanks
 > Adam
 >
 >
 >
 >
 >