Re: Half Bridge Solid State

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "chris swinson" <exxos-at-cps-games.co.uk> 



----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, December 19, 2003 2:42 PM
Subject: Half Bridge Solid State


 > Original poster: "David Trimmell" <humanb-at-chaoticuniverse-dot-com>
 >
 > Hi all, I have been looking at various half bridge SSTC topologies using
 > MOSFET"s and was wondering if anyone has used this IC:
 > http://www.irf-dot-com/product-info/datasheets/data/ir2153.pdf
 > It is the IR2153 Self-Oscillating Half-Bridge driver IC. I am new to all
 > this solid state stuff, so I am trying to find a nice, low count
 > (simple), circuit. Only desire is to be able to get ~10" sparks with a
 > small package, aside from secondary, of course. Anyone got a nice low
 > count circuit to share?


I haven't yet published my direct drive diagram though you can find some
past results at http://www.hot-streamer-dot-com/exxos/sstc/directdrive.htm

HTH

chris







 >
 > Regards,
 >
 > David Trimmell
 >
 >
 >
 >