Re: Modeling a pole transformer or potential transformer in PSPICE ? ? ?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Bart Anderson <classi6-at-classictesla-dot-com> 

Here's an old  Microsim 8 schematic with my 10kva 14.4kv pole transformer. 
The values shown for the transformer (on the left) were measured. The 
inductances were derived by measuring the noload current.

http://www.classictesla-dot-com/sim/ba5.gif

Bart

Tesla list wrote:

>Original poster: dhmccauley-at-spacecatlighting-dot-com
>Without re-inventing the wheel, anyone already have a good working PSPICE
>model of a non-current limited pole transformer or
>potential transformer.
>I need something quick (but accurate) for a simulation of mine, but I don't
>have the time or patience to drag my own transformers out of my
>freezing cold shed to make measurements and derive a good model from.
>
>
>
>Thanks
>Dan
>
>
>
>