non-transformer issues

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance by way of Terry Fritz <teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>


I'm sorry to report a recent miscommunication.  The xmfr mfgr thought I 
wanted a 120 VOLT primary and not a 120 MA secondary current.  The bottom 
line is they don't stock nor at present can run any 15 kV 120 mA xmfr units.

My reaction:  Aaaaarrrrggggg!

I will be returning the checks I've accumulated.

The only good news here is that they PROMISE to run the 16 kV 200 - 275 mA 
units this winter.  Unfortunately they can't run them now because all their 
mgmt time is being spent on getting a new factory up and running in China.

For now we'll just have to hold off.  They will run the high power 
core/coil units I require later this winter when design/lab time isn't so 
tight.  My design uses 26 AWG on the sec. so they will run it oil in the 
200 to 300 mA range without overheating.  It should make for an awesome TC 
transformer and be 65% the weight of a PT with no external reactor required.

Sorry boys for the problem.  I sure could have used 5 of them right now.

Dr. Resonance