[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: For pole transformer coilers
Original poster: "D.C. Cox by way of Terry Fritz <twftesla-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>
We use a small inductor, toroid with 10 turns of #12 AWG, in series with 6
two hundred watt resistors in parallel (total series resistance of 20 Ohms)
just to clip any real hf transients.
Dr. Resonance
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, September 19, 2002 7:32 PM
Subject: For pole transformer coilers
> Original poster: "J. B. Weazle McCreath by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <weazle-at-hurontel.on.ca>
>
>
> Hello Coilers,
>
> Some recent comments on the list have gotten me to wondering what
protective
> measures, aside from a safety gap, should be used with a pole transformer
in
> Tesla coil service?
>
> 73, Weazle, VE3EAR/VE3WZL
> G-1#1214
>
> Listening: 147.030+ and 442.075+
> E-mail: weazle-at-hurontel.on.ca
> or ve3ear-at-rac.ca
> Web site: http://www.hurontel.on.ca/~weazle
>
>