[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Lighting incandescent lamps with TC (fwd)



Original poster: "S Gaeta by way of Terry Fritz <twftesla-at-qwest-dot-net>" <sgtporky-at-prodigy-dot-net>

Hi Larry & List,

Even an ordinary clear eveloped incandescent bulb will get get a few "wows"
from the audience!
See http://community.webshots-dot-com/photo/17872929/50544866Cdcepo
You don't even need a high powered coil to get the effect. This was done by
positioning the bulb about 6" from the secondary of my 360W tube coil set at
half power to eliminalte breakout, and improve RF radiation. The secondary
can easily be cropped out of the photo to make people wonder what the %^&&
is happening!

Cheers,
Sue

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-poodle.pupman-dot-com.rmpg-dot-org>
Sent: Thursday, September 19, 2002 8:37 PM
Subject: Re: Lighting incandescent lamps with TC (fwd)


> Original poster: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>
>
>
>
> ---------- Forwarded message ----------
> Date: Thu, 19 Sep 2002 02:50:26 +0000
> From: Laurence Davis <meknar-at-hotmail-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Re: Lighting incandescent lamps with TC
>
> A neat trick I found out was using a flicker/candle bulb.
> when in a light socket is flickers like a flame, its filled with
> neon i believe.  if you hold the socket and wave it near the coil
> it glows, and sometimes becomes a small plasma bulb.  I have a faraday
> cage partially (its not finished yet) around my coil and when i touched
that
> with the bulb, it did the plasma bulb thing as well.
>
> kinda reminded me of the small "C" battery sized device dr bones used to
> scan people on the old star trek.
>
> larry.
>
> >From: "Tesla list" <tesla-at-pupman-dot-com>
> >To: tesla-at-pupman-dot-com
> >Subject: Re: Lighting incandescent lamps with TC
> >Date: Mon, 16 Sep 2002 22:08:21 -0600
> >
> >Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> ><evp-at-pacbell-dot-net>
> >
> >Tesla list wrote:
> > >
> > > Original poster: "davep by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> ><davep-at-quik-dot-com>
> > >
> > > > All,
> > >
> > > > I was wondering how many of you have tried the
> > > > experiment where you cause an incandescent lamp to
> > > > glow from current coupled by induction, by connecting
> > > > a wire loop across the contacts of the bulb.  I tried
> > > > this using a flashlight bulb, wire loop and approached
> > > > (as close as I dared without being tagged by
> > > > streamers) my running 6" coil.  Nothing.  Not even the
> > > > slightest glow from the filiment (spelling?).
> > >
> > >         close.
> > >         filament.  8)>>
> > >
> >