Re: new...help: ask specific questions.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Wells Campbell by way of Terry Fritz <twftesla-at-qwest-dot-net>" <wellscampbell-at-onebox-dot-com>

Hi Lutfi, and others with "catch all" requests, 

First off, welcome to the list.

Secondly, let me play "bad cop" here for a second :>) Just kidding, but
I do have a point...There have been a few mails lately asking for "detailed
instructions" on building coils and components such as SRSG's. Since
most of these can be done any number of ways, and usually could be adequately
covered by several hundred thousand pages of text, with graphs, charts,
schematics, etc, I don't think anyone is going to step up and give you
a good run down, even in summary. Aside from being somewhat risky, if
some safety consideration was left out for instance, it would be redundant,
because that info already exists in the archives and on many well done
websites.

Browsing and searching the archives is a better way to go about the hobby
(obsession) anyway, because everyone does things a little differently,
and you can pick and choose things you like. 

There are some guides out there, I think someone made a very thorough
video series, but I don't know exactly who, so maybe someone else can
post that info?

So do some reading of the archives, and START WITH THE SAFETY SHEET!
(when I built my first coil, I read the whole previous year's posts,
it took about three or four days, and helped immensely) and take a spin
around the tesla coil webring, look at some coils, and you will get a
good idea of what it's all about.

The list is a much more valuable tool when asked specific questions.
You are more likely to get too much information rather than too little
:>).
Don't be afraid to ask even the most simple things, most of us started
that way, and I for one am glad to "give back" by sharing knowledge.
But check the archives first, you will probably find the answer.

Hope this helps, welcome again, and happy coiling. 
 

-- 
Wells Campbell
wellscampbell-at-onebox-dot-com



---- "Tesla list" <tesla-at-pupman-dot-com> wrote:
> Original poster: "lutfi oksuz by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <l_oksuz-at-yahoo-dot-com>
> 
> 
> Hi 
> 
> I m new in this group and I want to build a Tesla discharge but I dont
> have
> any experience I need a detailed scheme and necessary equipment list
> with
> their specifications. if you write I will be pleased 
> 
> thanks 
> 
> Lutfi
> 
> 
> 
>