[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bleed Resistor for Homemade/Large Caps

To: tesla-at-pupman-dot-com
Subject: Bleed Resistor for Homemade/Large Caps
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 28 Oct 2002 11:50:17 -0700
Resent-Date: Mon, 28 Oct 2002 11:51:22 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <Mk2kX.A.hsD.gcYv9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Jeremy Scott by way of Terry Fritz <twftesla-at-qwest-dot-net>" <supertux1-at-yahoo-dot-com>

Hi there,

I was wondering what you use for bleeder
resistors on non-MMC (that is, large 
commercial caps, rolled poly, or 
"bucket caps") 

eg, how many ohms, how many watts. 

Thanks!



__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo-dot-com/

Prev by Date: counterpoise Success
Next by Date: Re: Balancing an RSG rotor
Prev by thread: Re: counterpoise Success
Next by thread: 25 Amp variac for sale (and small toroids)
Index(es):
- Date
- Thread