Re: Connecting secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ka1bbg-at-webryders-dot-net>

Hi, no, dont drill and feed the wire thru! it will cause all kinds of
problems...better to secure it with a small blob of epoxy. I even used vinyl
tape just for extra support, if anybody asks just tell them its what makes
good sparks. cul brian f.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, October 20, 2002 11:48 PM
Subject: Connecting secondary


> Original poster: "Matt Morrissette by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <yinzara-at-MIT.EDU>
>
>
> What is the best way to secure the wire on the secondary? Should I drill a
> small hole in the top and bottom and feed the wire through and secure it
from
> the back and connect the two ends to the toroid and ground?  Also how do I
> connect the toroid to the secondary (both physically and electrically)?
>
>
>
>