Re: Helllp =) making my first coil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "robert heidlebaugh by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rheidlebaugh-at-desertgate-dot-com>

Danny:   Your question requires you to choose. The geek group capacitor
assembly is an easy way to go and will serve for future projects. The salt
water beer bottle cap is less expensive but a lot of mess and size. wrapped
polly is more trouble and inbetween cost and size. All will work and all
have thier owm limitations. I use wrapped poly plates and capacitor assembly
and commercial discharge caps. All work well. Cost of commercial is not good
   Robert  H

> From: "Tesla list" <tesla-at-pupman-dot-com>
> Date: Tue, 08 Oct 2002 07:57:17 -0600
> To: tesla-at-pupman-dot-com
> Subject: Re: Helllp =) making my first coil
> Resent-From: tesla-at-pupman-dot-com
> Resent-Date: Tue, 8 Oct 2002 08:04:58 -0600
> 
> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <PLUGHzz-at-aol-dot-com>
> 
> If any of you have time to post a link or basic directions. I have
purchased a
> 15kv 30 ma neon sign transformer and am lookign to build a super easy
coil for
> my first. please tell me whivh cap's to use or make, I have made saltwater
> caps, party cup caps. I would prefer to make one or if someone could specify
> an
> easy place to get small caps for a mmc and how many I need. and how my
primary
> should be set up and secondary. I have been to all of the websites and
some of
> the jargon I cant figure out, nbut after makign a simple one I can scale up
> from there.
> Thank you all very much
> Danny L. Ray II
> 
>