Re: Variac Schematic Question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Bert Hickman by way of Terry Fritz <twftesla-at-qwest-dot-net>" <bert.hickman-at-aquila-dot-net>

Hi Vince,

Connect neutral to input #2, Hot to #4, and take the output between #2
and #3:

     (hot)  
       -------------
       4            O
                    O
                    O
                    O              
      IN            O<-------------
                    O             3
                    O            OUT
       2            O             2 
       -------------o--------------
                (neutral)

Good luck and best regards,

-- Bert --
-- 
Bert Hickman
Stoneridge Engineering
"Electromagically" (TM) Shrunken Coins!
http://www.teslamania-dot-com

Tesla list wrote:
> 
> Original poster: "Vince D'Amore by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <tesla-at-teslafx-dot-com>
> 
> Hello People
> 
>   Forgive me for asking again but I recently had a hard drive crash which
> contained emails regarding this from my first post.
> 
> Original Message
> 
>   I bought this variac on ebay and I am having trouble figuring out how to
> hook it up for standard line and variable output. Could some please take a
> look at the link provided below and perhaps tell me how this should be
> hooked up?
> I plan on using it to run a simple table top coil.
> 
> http://www.teslafx-dot-com/variac.html
> 
> Thanks
> Vince