Re: circuit board makers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Nick Andrews by way of Terry Fritz <twftesla-at-qwest-dot-net>" <nicothefabulous-at-hotmail-dot-com>

Not to mention that a belt sander will give a nice square edge while 
removing the perfs.

Nick A





>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: Re: circuit board makers
>Date: Thu, 21 Nov 2002 17:37:35 -0700
>
>Original poster: "Brett Miller by way of Terry Fritz <twftesla-at-qwest-dot-net>" 
><brmtesla-at-yahoo-dot-com>
>
>
>--- Tesla list <tesla-at-pupman-dot-com> wrote:
> > Original poster: "Crow Leader by way of Terry Fritz
> > <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>
> >
> > Are there any places like pcb123-dot-com or whatever
> > that will CUT up yout
> > finished boards to the size you want? I"m looking
> > for some boards around 2"
>
>If you can get access to a band saw, that will cut
>throught it like a hot knife through butter.  I have
>used one for this and it works great.
>
>-Brett
>
> > KEN
> >
> >