Re: MOT power supply

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Black Moon by way of Terry Fritz <twftesla-at-qwest-dot-net>" <black_moons-at-hotmail-dot-com>

the primary yes, the core, No.
the core would most likey saturate under such high input voltage, turning 
the primary into a few 100 foot of near short circuited wire.
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: MOT power supply
>Date: Fri, 15 Nov 2002 21:05:19 -0700
>
>Original poster: "Mark Rossman by way of Terry Fritz <twftesla-at-qwest-dot-net>" 
><marossma-at-oakland.edu>
>
>Has anyone built an MOT power supple with an imput voltage of 240v  with
>transformers that came from a 110 volt microwave. Im assuming that the
>primary windings could easily handle the higher voltage, but i thought id
>ask before i hooked it up.
>
>Thanks a lot
>Mark