[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Original poster: "PotLuck by way of Terry Fritz <twftesla-at-qwest-dot-net>" <potluck-at-xmission-dot-com>
Can a MOT be tested for current the same way an NST is tested?
I've tested my NSTs (15/60s and 15/30s) by connecting a 1000 ohm 100watt
resistor to one secondary then ramping up the primary voltage with a variac
while monitoring the voltage drop across the resistor. In this case 1 volt
equals 1 ma.
Maybe put two 1000ohm 100watt resistors in parallel to handle the wattage? 1
volt should equal 2 ma.
Salt Lake City