[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Toroid tape

Original poster: "marc metlicka by way of Terry Fritz <twftesla-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>

I wonder if you could increase topC by layering this type of tape up?
Marc M.

Tesla list wrote:
> Original poster: "Lau, Gary by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> I think what you have is a vacuum-deposited film of aluminum on plastic.
> If you were to use this on a toroid, assuming that you could make a
> conductive connection to it, the arcs would destroy the plastic immediately.
> What you want is adhesive-backed aluminum foil tape, with no plastic.  This
> is pretty common stuff in the US and is commonly available in the heating &
> air conditioning department of building supply stores.
> Gary Lau
>  -----Original Message-----
> From:   Tesla list [mailto:tesla-at-pupman-dot-com]
> Sent:   Monday, April 29, 2002 7:32 PM
> To:     tesla-at-pupman-dot-com
> Subject:        Toroid tape
> Original poster: "Tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <tcmail-at-poczta.fm>
> Hi!
> I want to make toroid, with metal tape surface.
> I have some metalic tape, but when I measure its resistance with a meter, I
> see,
> that it is not conductive. The metalic layer in my tape is between two thin
> layers of plastic. Also there is one layer of glue.
> Will my tape be conductive for high voltage?
> If not, what type of tape shall I look for?
> Thank You for all answers?
> Kamil Kompa