Re: please Help with RSG!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "BunnyKiller by way of Terry Fritz <twftesla-at-qwest-dot-net>" <bigfoo39-at-telocity-dot-com>

Tesla list wrote:

>Original poster: "G by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<bog-at-cinci.rr-dot-com>
>
>Hi,
>
>I need some advice about making rsg electrodes. I thought of giving 
>the great minds here a shot at this one. I have 1/4" tungsten carbide 
>rod, but I have been through the library and searched the Net and 
>cannot find information on how to cut it. I don't want to have to 
>guess with a $25 part :).
>
>Thank you for the replies,
>Greg
>
>
>
>
>
Hi Greg...

Tungsten C  isnt something that lends to cutting easiely.   It is 
possible to grind a small notch in it with a dremel cutting disc and 
then snap it like you would a glass rod. If you have pleanty of patience 
and alot of dremel cutting discs, you can grind/cut the rod completely thru.

Scot D