secondarys for tube coils

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Brad Huff by way of Terry Fritz <twftesla-at-qwest-dot-net>" <huffb-at-avalon-dot-net>

Most secondary windings for capacitive discharge systems, that I have seen
displayed here, are wound with #22 or #24 wire on a 3:1 or 4:1 form, but on
tube coils people are still using "grandpa's designs". That is small tube
diameter long forms with #28-#32 magnet wire. Which design is correct for tube
coils?-Brad.