[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Arc Over Between Secondary and Primary Coils
Original poster: "John H. Couture by way of Terry Fritz <twftesla-at-qwest-dot-net>" <couturejh-at-mgte-dot-com>
Bart -
I get Lm = K sqrt(LpLs) = .0452 sqrt(1.92 x 93.79 x 10^-9)
Lm = 19.18 uh (not 6.07 uh)
However, Java9.1 works OK and gives 19.18
when I use arbitrary inputs
Secondary 6 - 35.71 - .017855 - 0 0
Toroid 0 - 0 - 0 - 0
Primary 22 - .25 - 4 - 1.3142 - 0 - .66 - (-3)
Also checks closely with JHCTES Ver 3.3 program.
Did you use the correct inputs with Acmi?
John Couture
-----------------------------
-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Saturday, March 16, 2002 5:19 AM
To: tesla-at-pupman-dot-com
Subject: Re: Arc Over Between Secondary and Primary Coils
Original poster: "Barton B. Anderson by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <tesla123-at-pacbell-dot-net>
Hi All, Nolan -
Just quick note on Acmi. I reported an oddity in the -3 inch position on the
helix in the previous reply. This occurred because of a user input error =
me.
When the top of the helix dropped below zero, I made a mistake in the input
value.
With the right numbers from the user, Acmi of course is performing at it's
usual top notch level.
The -3 inch position should read:
PRMY.h| PRMY.L| PRMY.R| SCNY.L| SCNY.R|PRMY-SCNY.M|PRMY-SCNY.K
-3.000| 1.92 uH| 0.00|9379.04 uH| 42.36| 6.07 uH| 0.0452
Take care,
Bart
>
> Helix:
> PRMY.h| PRMY.L| PRMY.R| SCNY.L| SCNY.R|PRMY-SCNY.M|PRMY-SCNY.K
> -3.000| 2.01 uH| 0.00|9379.04 uH| 42.36| 5.68 uH| 0.0413
> -2.000| 1.92 uH| 0.00|9379.04 uH| 42.36| 11.32 uH| 0.0844
> -1.000| 1.92 uH| 0.00|9379.04 uH| 42.36| 19.61 uH| 0.1461
> 0.000| 1.92 uH| 0.00|9379.04 uH| 42.36| 27.71 uH| 0.2065
> 1.000| 1.92 uH| 0.00|9379.04 uH| 42.36| 32.65 uH| 0.2433
> 2.000| 1.92 uH| 0.00|9379.04 uH| 42.36| 35.05 uH| 0.2613
> 3.000| 1.92 uH| 0.00|9379.04 uH| 42.36| 36.25 uH| 0.2702
> Note: not sure why -3 in helix showed PRMY.L at 2.01 uH.