RE: PVC secondaries

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jeff W. Parisse by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jparisse-at-teslacoil-dot-com>

Rob,

It's the surface of the PVC that needs treatment. The surface, not the
PVC innards become "conductive". D.C. Cox offered good advice: Clean it
with solvent, (sand it maybe), coat it, wind it... ;)

Jeff


That is probably true if you get a piece right out of the manufacturing
plant.  But most pvc and abs sits for a long time before you buy it, so
you are probably sealing in the moisture permanently.

Rob.