[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Knob and dial face



Original poster: "Yurtle Turtle by way of Terry Fritz <twftesla-at-qwest-dot-net>" <yurtle_t-at-yahoo-dot-com>

It may not be as pretty as a real knob, but check out
my home-made knob at:

http://www.geocities-dot-com/yurtle_t/tesla/controller.htm

I used a PVC cap and a threaded bushing. I replaced my
metal shaft with a hardwood dowel so I could thread it
into my knob.

Adam

> Original poster: "Ben McMillen by way of Terry
Fritz <twftesla-at-qwest-dot-net>"
<spoonman534-at-yahoo-dot-com>
>
> Hi all,
>   Does anyone have or know where I can get a
sizeable knob
> ( Larger than 3" in diameter ) and a matching dial
face
> that goes up to 220V? It has to fit a 1/2" shaft..
it's for
> the voltage variac in my power cabinet.. ;)
>
> Thanks for any help!
>
> Coiling in Pittsburgh
> Ben McMillen

=====
Adam Minchey
yurtle_t-at-yahoo-dot-com
http://www.geocities-dot-com/yurtle_t/index.htm