Re: new coil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "jimmy hynes by way of Terry Fritz <twftesla-at-qwest-dot-net>" <chunkyboy86-at-yahoo-dot-com>

 does your fet driver use a timer that you have to
tune to the right frequency or does it have a feedback
coil that tells it when to switch?

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "rob by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <rob-at-pythonemproject-dot-com>
> 
> Last night I wound 18" of #26 on a 4.5" O.D. form. 
> Gonna hook it up to
> my lowly 30V MOSFET driver.  At least its an upward
> path to somewhere
> :)  2.5Mhz just wasn't fun enough.  <300khz has more
> possibilities.  I
> guess now I need to build a toroid.  The roommates
> asked my what the
> pipe was for.  I told them I was beefing up the
> toilet plumbing :)  They
> didn't believe that, so I told them if the lights
> started dimming, run
> out of the house quickly.  Rob.
> 
> 
> 
> 
> -- 
> -----------------------------
> The Numeric Python EM Project
> 
> www.pythonemproject-dot-com
> 
> 
> 


=====
JImmy

_