Re: Wiring of EMI Line Filter and PFC Caps

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Yurtle Turtle by way of Terry Fritz <twftesla-at-qwest-dot-net>" <yurtle_t-at-yahoo-dot-com>

Actually, my 40 amp Corcom was blown up by just two
15/30's when running it "backwards". I'ver never had
problems with my current filters, even at pig power,
when running them "frontwards".

Adam

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "Mccauley, Daniel H by way of Terry
> Fritz <twftesla-at-qwest-dot-net>"
> <daniel.h.mccauley-at-lmco-dot-com>
> 
> 
> 
> I am assuming that the RF Line filters should be
> wired backwards so that the
> "load" side is input power, and the "line" side is
> output to the NST.
> 
> Also, should I wire the PFC Capacitors before or
> after the RF Line Filter.
> 
> Thanks
> Dan
> 
> 
> 


=====
Adam Minchey
yurtle_t-at-yahoo-dot-com
http://www.geocities-dot-com/yurtle_t/index.htm