Re: Attaching Tungsten Electrodes to Rotor etc...

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>

Precisely correct
Best
Ted L in NZ>

 I guess most people would just use a copper bus bar on the other side???
>
> Dan
>
>
>
>
> > Hi Dan
> > If I understand your question the answer is designs that do not run the
> > current in , around a ring then out the other electrode are usually
> designed
> > so that the current passes from a fixed electrode , thru the rotating
> > electrode then out the other side of that same rotating electrode. Many
> pix
> > on the Tesla sites of designs like this.
> > Rgds
> > Ted L in NZ
> >
> > > Original poster: "Daniel McCauley by way of Terry Fritz
> > <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>
> > >
> > >
> > > How is the electrical connection made in this configuration without
the
> > use
> > > of an aluminum ring?
> > >