Re: Gluing Plexiglass Disks to Secondary PVC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <megavolt121-at-attbi-dot-com>

rotozip works fine too... not only does it work on tv, 
but it also works in my garage:)

> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" 
> <dan.gallagher-at-pulsartech-dot-com>
> 
> 
> Hi folks,
> I've thought of how to make round plexi circles. Well the dremel tools now
> come with this adapter that you can put on the end to stand it upright and
> cut sort of like a router. I was going to try this with the dremel hooked
> to a string that is connected to the center point, then just "router"
> around and voila, a circle. Should work right?
> 
> 
> 
> |--------+------------------------>
> |        |          "Tesla list"  |
> |        |          <tesla-at-pupman.|
> |        |          com>          |
> |        |                        |
> |        |          07/17/2002    |
> |        |          10:24 PM      |
> |        |                        |
> |--------+------------------------>
> 
> >---------------------------------------------------------------------------
> -----------------------------------------------------------------|
>   |
>                                                                    |
>   |      To:     tesla-at-pupman-dot-com
>                                                                    |
>   |      cc:
>                                                                    |
>   |      Subject:     Re: Gluing Plexiglass Disks to Secondary PVC
>                                                                    |
> 
> >---------------------------------------------------------------------------
> -----------------------------------------------------------------|
> 
> 
> 
> 
> Original poster: "Daniel McCauley by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>
> 
> I used a benchtop scroll saw.
> Dan
> 
> A scroll saw, band saw, or even a jigsaw should do the trick.
> 
> Dan
> 
> 
> 
> > hey dan how did you cut your plexi into circles..
> >
> >
> > ----- Original Message -----
> > From: "Tesla list" <tesla-at-pupman-dot-com>
> > To: <Tesla-at-pupman-dot-com>
> > Sent: Wednesday, July 17, 2002 12:30 PM
> > Subject: Gluing Plexiglass Disks to Secondary PVC
> >
> >
> > > Original poster: "Mccauley, Daniel H by way of Terry Fritz
> > <twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>
> > >
> > >
> > >
> > > I want to cap my PVC secondary with regular plexiglass.  Will
> > > standard two-part epoxy like the kind from the automotive store bond to
> > PVC
> > > and plexiglass provided i rough up the areas to be epoxied??
> > >
> > > Thanks
> > > Dan
> > >
> >
> >