[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: cx2708 thyratron
Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>
In a message dated 7/17/02 3:00:09 PM Eastern Daylight Time, tesla-at-pupman-dot-com
writes:
Bob,
That's a spectacular find! You seem to have found the ideal
thyratron for a TC. It's the hollow anode type which can also handle
1000 amps of reverse currents if I understand the specs correctly.
The peak voltage of 40kV is excellent too. If the unit works, it
offers you the opportunity to build a TC project that no one
else has ever built as far as I know. Richard Hull built a thryratron
TC, but it was the type which can only handle a unidirectional
current, not the reverse currents. As a result, Richard was forced
to keep the thryratron "on" for only 1/4 of an RF cycle, which
severely limited its performance. The thyratron can be turned
off at the first RF beat notch (first energy transfer), to prevent
the energy from returning to the primary, thereby reducing
the "gap" (switch) losses greatly.
Cheers,
John
>
> Original poster: "bob by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <yubba-at-clara-dot-net>
>
> hi all ,
> picked up a big thyratron today lying in the mud at the scrap yard. Does
> anyone know if it would work as a triggered gap? i am not familiar with
> thyratrons but thought they had fast on slow off characteristics? data
> sheet is
> here
> http://www.marconitech.co.uk/cgi-bin/download.cgi?thyratron&cx2708.pdf
> should make a nice bang if nothing else.
>
> cheers
> bob golding
>
>