RE: First Pics of my First Tesla Coil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mccauley, Daniel H by way of Terry Fritz <twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>


The secondary is 1000 Turns, approx. 5:1 aspect ratio, 24 AWG, and about
23.5 inches in winding length.

Dan



> Dan,
> Look'in good! What's the specs on you're secondary?I'm running a 15/60
> with
> a .0168uf cap, static gap,secondary is 4"pvc with 28awg wire wound27"
> (about
> 1600 turns) with a 6"x24" toroid and I'm tapped on the primary at 16
> turns.
> Billy
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Saturday, July 13, 2002 11:42 PM
> Subject: First Pics of my First Tesla Coil
> 
> 
> > Original poster: "Daniel McCauley by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>
> >
> > Just wanted to thank everyone for their help so far.  My very first
> > conventional tesla coil is on its way.  You can see some of the
> > pictures of this coil in progress at:
> >
> > http://www.spacecatlighting-dot-com/teslacoil3.htm
> >
> > Thanks again!
> >
> > Dan
> >
> >
> >
> >
> >
> 
> 
> 
>