Re: inductor current limiting for MOTs

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Yurtle Turtle by way of Terry Fritz <twftesla-at-qwest-dot-net>" <yurtle_t-at-yahoo-dot-com>

Are these still available? I tried to email twice to
mystuffs-at-orwell-dot-net, but haven't heard back. I'm
interested in the 100 amp one. You can contact me at
yurtle_t-at-yahoo-dot-com

thanks
Adam

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "marc metlicka by way of Terry
> Fritz <twftesla-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>
> 
> 
> 
> Tesla list wrote:
> 
>  I have two flat wire wound , variable inductors for
> sale. since i
> acquired
> a very nice three phase welder with a
>  500 amp voltage variac along with a three phase 500
> amp variable
> inductor i don't think i'll need the 150 amp spacer
> adjusted inductor.
> any one interested contact me at
> :mystuffs-at-orwell-dot-net.
> These are factory units exactly like richie bernets
> coustom built units,
> if not satisfied and not burnt, i will replace cost
> and shipping. i
> guaranty that i rang these out with my lcr meter
> with several spacer
> thicknesses and they will run 20 to 100 and 20 to
> 175 amp (respectively)
> pass with no excessive heating! These are current
> limiting inductors out
> of complex AC motor drives.
> pictures can be supplied, or seen on my web site.
> Marc M.
> 
> 
> 


=====
Adam Minchey
yurtle_t-at-yahoo-dot-com
http://www.geocities-dot-com/yurtle_t/index.htm