Re: good doorknobs for VTTC?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "D.C. Cox by way of Terry Fritz <twftesla-at-qwest-dot-net>" <DR.RESONANCE-at-next-wave-dot-net>



KVAR is kilo-Volts-Amperes-reactive

Dr. Resonance




----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, July 12, 2002 7:03 AM
Subject: good doorknobs for VTTC?


> Original poster: "Steven Ward by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<srward16-at-hotmail-dot-com>
>
> Hey guys,
>
> Your eyes may be better than mine for picking out a good doorknob for a RF
> application as in my VTTC.  But ive found these really large(9cmx3cm)
> doorknobs made in Russia,  Id use 2 (or more) in parallel.  Take a look at
> these:
>
> http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=1748353856
>
> Im guessing the size would help with the high current handling i need, and
2
> in parallel will also help.  By the way what does "kvar" mean?? ive seen
> this all the time but dont know what it means.  Oh and by the way, this
will
> be the primary tuning cap for my coil.  Thanks guys,
>
> Steve Ward.
>
>
>
>
>