[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

NST Safety Gap Distance???

To: tesla-at-pupman-dot-com
Subject: NST Safety Gap Distance???
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 09 Jul 2002 07:31:21 -0600
Resent-Date: Wed, 10 Jul 2002 05:24:41 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <bl5tV.A.nT.1lBL9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Daniel McCauley by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

I'm laying out my perfboard for my NST filter which includes safety gaps.

The NST is 15kV.  What is the ballpark gap distance for 15kV.
My gap will be fully adjustable but i just need a starting point so I can
machine my board properly.

Thanks again.

Dan

Prev by Date: RE: PLL-controlled SSTC?
Next by Date: RE: High Power Solid State Tesla Coil - Successful Test (EMI Susceptibility Question)
Prev by thread: RE: Pocket neons/ neon sticks etc.
Next by thread: RE: NST Safety Gap Distance???
Index(es):
- Date
- Thread