Re: rotary gap: disc with holes?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "D.C. Cox by way of Terry Fritz <twftesla-at-qwest-dot-net>" <DR.RESONANCE-at-next-wave-dot-net>


Yes it is.  Just look in a Thomas Register for your local distributor.

Dr. Resonance



----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, July 07, 2002 7:11 PM
Subject: Re: rotary gap: disc with holes?


> Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<evp-at-pacbell-dot-net>
>
> Tesla list wrote:
> >
> > Original poster: "D.C. Cox by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <DR.RESONANCE-at-next-wave-dot-net>
> >
> > The machineable material is called micalex.
> >
> > Dr. Resonance
>
> Is it still being made?  Used quite a bit of it back in the early
> 1950's.
>
> Ed
>
>
>
>