[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Building Secondary

To: tesla-at-pupman-dot-com
Subject: Re: Building Secondary
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 26 Jan 2002 18:27:21 -0700
In-Reply-To: <002c01c1a6b6$5382e330$9865fea9-at-c655424c>
Resent-Date: Sat, 26 Jan 2002 18:42:00 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <xOKSXB.A.KIE.gr1U8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Sounds fine to me.  I would leave 1/4 inch at each end of the form.

Cheers,

        Terry


At 04:10 PM 1/26/2002 -0600, you wrote: 
>
> Hey, I'm about read to start building my secondary. I chose 26" by 5" fo my
> secondary on a coil powered by a 12kV 60mA nst, but I can't remember why. Do
> those dimensions appear correct and, if so, how much of that should I
> actually wind with wire? Thanks.

Prev by Date: RE: Large Transformers and Capacitors
Next by Date: Re: Large Transformers and Capacitors
Prev by thread: Building Secondary
Next by thread: Re: Building Secondary
Index(es):
- Date
- Thread