[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: help tuning

To: tesla-at-pupman-dot-com
Subject: Re: help tuning
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 13 Jan 2002 13:21:25 -0700
In-Reply-To: <001e01c19c6b$c545bc40$1310ff3e-at-pbncomputer>
Resent-Date: Sun, 13 Jan 2002 16:16:15 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <QMWLcC.A.i-C.7UhQ8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Colin,

What is the voltage and current of your transformer (assuming it is an NST) and
what type of gap (static?) are you using?  Also what type and size of primary
cap are you using?

Cheers,

        Terry

At 07:52 PM 1/13/2002 +0000, you wrote: 
>
> hi all i have had first light on my table top coil with 4" sparks from 6Kv
> but would like help tuning it will a bigger gap give better performance

Prev by Date: help tuning
Next by Date: Re: Ionizing Xfmr value
Prev by thread: help tuning
Next by thread: RE: help tuning
Index(es):
- Date
- Thread