Re: Program to calculate capacitance of plate cap

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "rheidlebaugh by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rheidlebaugh-at-zialink-dot-com>

Jason: Idont have the formula handy, one of the other coilers may have. My
stacked plate caps are 3.62 nf each. They have 12 layers of 4 mill poly and
the plates overlap 8 x 6 inch in the stack. I hope this is a help.
   Robert  H

> From: "Tesla list" <tesla-at-pupman-dot-com>
> Date: Wed, 02 Jan 2002 16:31:50 -0700
> To: tesla-at-pupman-dot-com
> Subject: Program to calculate capacitance of plate cap
> Resent-From: tesla-at-pupman-dot-com
> Resent-Date: Thu, 3 Jan 2002 00:15:44 -0700
> 
> Original poster: "Jason by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <jasonp-at-btinternet-dot-com>
> 
> Hi all,
> 
> Is there a program kicking around that can calculate the capacitance of a
> plate capacitor? this is the one thing that wintesla doesnt have :)
> 
> Best Regards,
> Jason
> 
> --------------------------------------------
> Geek #1139 G-1 - www.thegeekgroup-dot-org
> "Because the Geek will inherit the Earth!!!"
> --------------------------------------------
> 
> 
>