Re: suitable bleeder resistors for MMC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Malcolm Watts by way of Terry Fritz <twftesla-at-qwest-dot-net>" <m.j.watts-at-massey.ac.nz>

On 26 Feb 2002, at 7:50, Tesla list wrote:

> Original poster: "Shaun Epp by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<scepp-at-mts-dot-net>
> 
> > ---SNIP---
> > I'm using 10 MegOhm 1/2W metal film resistors manufactured by 
> > Philips. These are rated for 2.5kV if I remember rightly. I'm 
> > impressing 1.5kV max across them. They are available from RS 
> > Components.
> 
> Are you saying Radio Shack has good resistors??
> 
> Shaun Epp

No. RS COmponents is (I think) an English-based outfit. 
 
> > Regards,
> > Malcolm
> > 
> 
> 
> 
>