Re: Source for PFC caps

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

Dave,

see www.usamfg-dot-net.  Select capacitors, then motor run, then the voltage you
are interested in.  You will find bargains galore.

--Steve
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, February 05, 2002 8:47 AM
Subject: Source for PFC caps


> Original poster: "Dave Leddon by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<leddon-at-attbi-dot-com>
>
> Does anyone know of a surplus dealer who has motor run caps acceptable for
> use in power factor correction?   I ordered three of the 135 MFD -at- 265 VAC
> capacitors from Herbach & Rademan, but just received notification that
this
> cap is out of stock and no longer available.  I calculated that I need 332
> MFD total to achieve a power factor of 1.0 on my nst.
>
> Dave
>
>
>