[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

I want huge sparks.

To: tesla-at-pupman-dot-com
Subject: I want huge sparks.
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 18 Dec 2002 17:22:39 -0700
Resent-Date: Wed, 18 Dec 2002 17:23:07 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <Lb8FcB.A.hIB.lFRA--at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "DAVID HJORTH by way of Terry Fritz <twftesla-at-qwest-dot-net>" <d2hjorth-at-msn-dot-com>




Hi all! What would be the best design for a tesla coil with a 15000 volt 60
ma neon transformer , 4.5 inch diameter/ 16 inch long /gage 22 / secondary
coil, cap is 0.0141 uf, with a toroid with a d+c =16 in. and dt =4.5  to get
the maximum spark length ? Or could you tell me what would be the best
design for the transformer and cap only to get the maximum spark length.
This is a conventional coil. thanks David

Prev by Date: Re: Geek Group Caps
Next by Date: Re: Tesla Power Transmission (German)
Prev by thread: Re: Good Caps for Tesla Coiling
Next by thread: Re: I want huge sparks.
Index(es):
- Date
- Thread