Re: almost free sync motor

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

Nobody seems to want this motor yet. Mail me off list if you do. I payed
only shipping for it from Terry and want to pass it on along the same lines
to somebody else.

KEN

----- Original Message -----
From: "Crow Leader" <tesla-at-lists.symmetric-dot-net>
To: "Tesla list" <tesla-at-pupman-dot-com>
Sent: Monday, December 09, 2002 6:46 AM
Subject: almost free sync motor


 > I have for almost free a 1800 RPM hysteresis synchronous motor for use at
 > 120VAC 60Hz. Not in the picture, but included is a 4uF motor run cap.
 >
 > Motor is 5" long between mounting flats at each end, 3.5" in diameter. The
 > shaft extends 0.75" from the mounting surface and has a 5/16" shaft with
 > shallow flat. It probably weighs 4-5 pounds.
 >
 > I've tried contacting the maker, Eastern Air Devices, but they cannot find
a
 > spec sheet on file. It previously ran a 8" diameter spark gap.
 >
 > Shipping is $7.50 or less in the continental US via Fedex Ground. Contact
me
 > off-list before anybody else and you "win".
 >
 > http://energybeam-dot-com/components/syncmotor.JPG
 > http://energybeam-dot-com/components/syncmotor-label.JPG
 >
 > KEN
 >