[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Where to drill ?

To: tesla-at-pupman-dot-com
Subject: Where to drill ?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 03 Dec 2002 12:19:07 -0700
Resent-Date: Tue, 3 Dec 2002 12:19:51 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <Y99oAD.A.EsC.QPQ79-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Christopher \"CajunCoiler\" Mayeux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <cajuncoiler-at-cox-dot-net>

I am currently constructing a new RQ-style spark gap, using
4 inch schedule 40 PVC, and 3/4 inch copper tubing (6 pieces).
The enigma at hand is where along the surface should I drill,
to space the gaps at the .3571 inches that WinTesla suggests?

A simple diagram of what I have, is located at...
http://members.cox-dot-net/msbsales2/how_far.jpg

Help!
---
Christopher "Cajun Coiler" Mayeux
http://www.cajuncoiler.tk

Prev by Date: RE: Personal Experience was: Re: Musically Responsive TC's
Next by Date: Re: MOT Coil operational notes
Prev by thread: Re: NST
Next by thread: Re: Where to drill ?
Index(es):
- Date
- Thread