Re: MMC comparison

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

can you tell us a bit more of your non-mmc cap other than it's commercial?
Chinese christmas tree lights are commerical items.

KEN

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, August 23, 2002 9:13 PM
Subject: MMC comparison


> Original poster: "Brett Miller by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<brmtesla-at-yahoo-dot-com>
>
> All,
>
> Today I did a comparison between my .01uF commercial
> pulse cap and a .012uF Panasonic ECW-H16563JV MMC.  My
> specs were:
>
> 6" AWG #23 PVC secondary wound for 24" length
> 14 turns 30 degree inverted cone .25" cu primary
> 12/60 France NST
> standard cylinder TCBOR gap running 4 gaps
> 2.75" x 11.75" Anti corona ring sitting directly atop
> the secondary
> 4" x 17" dryer duct toroid sitting directly atop the
> ACR
>
> Arcs were up to 43 inches with both capacitors.  They
> were just as brilliant and bright with the MMC if not
> more so.  I could have gotten more output by
> increasing the gap but I don't want to risk killing
> the NST as I have no protection filter at the moment
> (have the parts just haven't built it yet).
>
> - Brett Miller
> hot-streamer/brett
>
>
>
>